TUBELESS CONVERSION - A 10 STEP GUIDE TO GOING TUBELESS
After ensuring the rim is clean, fit Rim Tape or Easi-Fit Rim Bands to the rim bed of the wheel.
Skip to step 4 if using Easi-Fit Rim Bands.
If using Rim Tape ensure a 10cm overlap of tape.
Use a Phillips Screwdriver (the diameter of the valve hole) to create space for your valve in the Rim Tape.
Ensure airtight seal using the valve nut.
Use Mounting Gel on the bead of your tyre to assist with tyre installation. Mount tyre onto wheel.
Fill your tyre with the recommended quantity of Weldtite Tubeless Tyre Sealant.
40ml = 700c x 18-23
60ml = 26”/700c 28-35
80ml = 27.5” / 650B
120ml = 29” / DH
Use a tubeless specific pump to fill your tyre with air. Ensure the tyre seats. Tip - listen for a ‘popping’ noise as your tyre seats.
Rotate your wheel so the sealant can move around the tyre, ready to do it’s job in the event of a puncture.